Kitchen Soffit Lighting with recessed lights is one of the most desired looks in modern homes. Many homes built during the 70’s and 80’s came with soffits built in to the kitchen and bathroom ceilings that housed fluorescent tube fixtures with plastic lenses covering them.
A popular update to this type of lighting is to remove the old fluorescent lighting and install recessed lighting inside the ceiling of the soffit. This is a great look, especially when it is finished off with crown moulding.
If you are considering this type of retrofit, there are a few things you need to take into consideration:
The inside of the soffit will need to be resurfaced by a drywall professional and then painted. You have to remember that the inside of the soffit was never meant to be seen, hence it was typically only coated one time by the original drywall finisher and not textured like the rest of your kitchen ceiling. In the picture to the right, we have installed crown moulding inside the soffit, and then coated and retextured the entire ceiling.
- I highly recommend installing either 5-inch or 6-inch recessed lights for the general lighting. The reason is that the light bulbs these fixtures use are designed for general lighting and will spread light much better than the smaller 4-inch recessed lights.
- Depending on the size of your soffit opening in relation to your kitchen, you may need to install some additional recessed lights around the perimeter of the soffit directly over your work areas for task lighting. Remember that the light coming out of the original fluorescent tubes is omnidirectional and spreads really well.On the other hand, the light coming out of a recessed light fixture is unidirectional. So as you can imagine, if you only install recessed lights in the center of your kitchen soffit, you may end up with a bright floor and dark counter tops (where you need the light the most).
Although the open soffit look is great, it’s not for everyone…
Another option is to frame and patch over the soffit opening, and then install recessed lighting. This may seem a bit boring, but in reality it is actually a more modern look because it is how new homes are being built.
- Removing the existing fluorescent lighting
- Framing the soffit opening
- Attaching drywall to the framing
- Taping the new drywall and texturing the entire ceiling
- Installing the new recessed kitchen lights
- Painting the ceiling
Have a comment or question about your kitchen lighting? Leave it in the box below and I’ll do my best to answer it for you!